Internet DRAFT - draft-huynh-disman-conditionmib
draft-huynh-disman-conditionmib
Network Working Group An-ni Huynh
Expires August 23, 2001 Condition MIB Mark Stewart
Internet Draft Lucent Technologies
February 23, 2001
CONDITION MIB
draft-huynh-disman-conditionmib-00.txt
Status of this Memo
This document is an Internet-Draft and is in full conformance with
all provisions of Section 10 of RFC2026.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as
Internet-Drafts.
Internet-Drafts are draft documents valid for a maximum of six
months and may be updated, replaced, or obsoleted by other documents
at any time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
Copyright Notice
Copyright (C) The Internet Society (2000). All Rights Reserved.
1. Abstract
This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in TCP/IP-based internets.
In particular, it defines objects for current and historical data of
conditions of a network device. A trap is defined for notifying
status of a condition.
Textual Conventions used in this MIB are defined in [RFC2579].
Table of Contents
1 Abstract .............................................. xx
2 The SNMP Network Management Framework ................. xx
3 Introduction ......................................... xx
3.1 Terminology ........................................ xx
4 Object Definitions .................................... xx
5 Open Issue ............................................ xx
6 Security Considerations ............................... xx
7 Acknowledgments........................................ xx
8 References ............................................ xx
10 Author's Address ...................................... xx
11 Intellectual Property ................................. xx
Full Copyright Statement ................................ xx
2. The SNMP Network Management Framework
The SNMP Management Framework presently consists of five major
components:
0 An overall architecture, described in RFC 2571 [RFC2571].
0 Mechanisms for describing and naming objects and events for the
purpose of management. The first version of this Structure of
Management Information (SMI) is called SMIv1 and described in
STD 16, RFC 1155 [RFC1155], STD 16, RFC 1212 [RFC1212] and RFC
1215 [RFC1215]. The second version, called SMIv2, is described
in STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and
STD 58, RFC 2580 [RFC2580].
0 Message protocols for transferring management information. The
first version of the SNMP message protocol is called SNMPv1 and
described in STD 15, RFC 1157 [RFC1157]. A second version of
the SNMP message protocol, which is not an Internet standards
track protocol, is called SNMPv2c and described in RFC 1901
[RFC1901] and RFC 1906 [RFC1906]. The third version of the
message protocol is called SNMPv3 and described in RFC 1906
[RFC1906], RFC 2572 [RFC2572] and RFC 2574 [RFC2574].
0 Protocol operations for accessing management information. The
first set of protocol operations and associated PDU formats is
described in STD 15, RFC 1157 [RFC1157]. A second set of
protocol operations and associated PDU formats is described in
RFC 1905 [RFC1905].
o A set of fundamental applications described in RFC 2573
[RFC2573] and the view-based access control mechanism described
in RFC 2575 [RFC2575].
A more detailed introduction to the current SNMP Management Framework
can be found in RFC 2570 [RFC2570].
Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. Objects in the MIB are
defined using the mechanisms defined in the SMI.
This memo specifies a MIB module that is compliant to the SMIv2. A
MIB conforming to the SMIv1 can be produced through the appropriate
translations. The resulting translated MIB must be semantically
equivalent, except where objects or events are omitted because no
translation is possible (e.g., use of Counter64). Some machine readable
information in SMIv2 will be converted into textual descriptions in
SMIv1 during the translation process. However, this loss of machine
readable information is not considered to change the semantics of the
MIB.
3. Overview
There is a need to provide a mechanism for a manager to retrieve
information of Active standing and transient conditions in a system as
defined in ITU-T Recommendation X.733 [X733] and X.736 [X.736].
This MIB module defines three tables. All active standing conditions
can be retrieved from the condActiveTable. As standing conditions
are cleared, they are moved from the condActiveTable to condRetiredTable.
The third table condTransientTable stores the information of all transient
conditions.
Two notifications are defined for multiple notification types: condActiveEvent,
and condRetiredEvent. Both notifications specify the condition information
from its variables (e.g. severity, perceived probable causes, level of
severity, and the alarm location).
Notifications are generated based on the value of condNotificationSelection.
A SNMP agent sends notifications based on the level of severity of the conditions.
It is the responsibility of the manager to periodically synchronize
with the agent using the condActiveTable and condRetiredTable to
determine if any condition notification have been missed.
There is an open issue in defining ConditionProbableCause.
It is explained in detail in section 5: Open Issue.
3.1 Terms
- Condition: A standing or transient condition that has occured in a
system. A condition does not have to be an error or fault condition.
For instance, a manager may want to receive a notification when a
circuit pack is inserted to the system.
4. Object Definitions
OTN-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32,
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, DateAndTime, TruthValue
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
condMIB MODULE-IDENTITY
LAST-UPDATED "200102230000Z"
ORGANIZATION " "
CONTACT-INFO
"Anni Huynh
Lucent Technologies
E-mail: ahuynh@lucent.com."
DESCRIPTION
"The MIB module is to describe standing, transient conditions for the system
based on the information defined in ITU-T Recommendation X.733
and X.736."
REVISION "200102230000Z"
DESCRIPTION
"The initial version."
::={ mib-2 yy}
------------------
-- MIB Objects
------------------
condMIBObjects OBJECT IDENTIFIER ::= { conMIB 1 }
condActive OBJECT IDENTIFIER ::= { condMIBObjects 1 }
condRetired OBJECT IDENTIFIER ::= { condMIBObjects 2 }
condStanding OBJECT IDENTIFIER ::= { condMIBObjects 3 }
condNotice OBJECT IDENTIFIER ::= { condMIBObjects 4 }
--------------
-- Event
--------------
condEvents OBJECT IDENTIFIER ::= { condMIB 2 }
condEventsV2 OBJECT IDENTIFIER ::= { condEvents 0 }
----------------------
-- Textual Convention
----------------------
ConditionIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The unique identifier of a condition and/or condition
notice within a table."
SYNTAX Unsigned32
ConditionLocation ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A text field describing the physical or logical location at
which a condition occurred.
The fields <node>,<Rack>,<shelf>,<slot>,<port> would be concatenated
into the physical location identifier with some delimiter."
SYNTAX SnmpAdminString
ConditionSeverity ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The perceived severity level of a condition."
REFERENCE
"Recommendation X.733 (02/92) - Information Technology -
Open Systems Interconnection - Systems Management:
Alarm Reporting Function"
SYNTAX INTEGER {
cleared(1),
indeterminate(2),
warning(3),
minor(4),
major(5),
critical(6)
}
ConditionCategory ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The category of a condition."
REFERENCE
"Recommendation X.733 (02/92) - Information Technology -
Open Systems Interconnection - Systems Management:
Alarm Reporting Function"
SYNTAX INTEGER {
communications(1),
qualityOfService(2),
processingError(3),
equipment(4),
environmental(5)
}
ConditionProbableCause ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The probable cause of a condition."
REFERENCE
"Recommendation X.733 (02/92) - Information Technology -
Open Systems Interconnection - Systems Management:
Alarm Reporting Function"
SYNTAX INTEGER {
acPowerA(1),
acPowerB(2),
adapterError(3),
alarmIndicationSignal(4),
applicationSubsystemFailure(5),
bandwidthReduced(6),
callEstablishmentError(7),
communicationsProtocolError(8),
communicationsSubsystemFailure(9),
componentInsertion(10),
componentMalfunction(11),
componentMismatch(12),
componentRemoval(13),
configurationOrCustomizationError(14),
congestion(15),
coolingFanFailure(16),
coolingFansFailure(17),
coolingFanPowerA(18),
coolingFanPowerB(19),
coolingFanPowerFail(20),
corruptData(21),
cpuCyclesLimitExceeded(22),
dataSetOrModemError(23),
dcPowerA(24),
dcPowerB(25),
degradedSignal(26),
dTEDCEInterfaceError(27),
enclosureDoorOpen(28),
excessiveBitErrorRate(29),
excessiveVibration(30),
fileError(31),
fireDetected(32),
floodDetected(33),
framingError(34),
humidityUnacceptable(35),
inputOutputDeviceError(36),
inputDeviceError(37),
lANError(38),
leakDetected(39),
localNodeTransmissionError(40),
lossOfLock(41),
lossOfOpticalPower(42),
lossOfSignal(43),
materialSupplyExhausted(44),
multiplexerProblem(45),
outOfMemory(46),
ouputDeviceError(47),
performanceDegraded(48),
power48VoltsA(49),
power48VoltsB(50),
pressureUnacceptable(51),
processorProblem(52),
protectionSwitch(53),
provisioningMismatch(54),
pumpFailure(55),
queueSizeExceeded(56),
receiveFailure(57),
receiverFailure(58),
remoteNodeTransmissionError(59),
resourceAtOrNearingCapacity(60),
responseTimeExcessive(61),
retransmissionRateExcessive(62),
softwareBootUpgradeFailed(63),
softwareDownloadTerminated(64),
softwareError(65),
softwareProgramAbnormallyTerminated(66),
softwareProgramError(67),
stateTransition(68),
storageCapacityProblem(69),
temperatureUnacceptable(70),
thresholdCrossed(71),
timingProblem(72),
toxicLeakDetected(73),
transmitFailure(74),
transmitterFailure(75),
underlyingResourceUnavailable(76),
versionMismatch(77)
}
---------------------------
-- Active condition objects
---------------------------
condActiveMaxNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of active conditions the system will
store in condActiveTable. This value is set high
enough that it cannot be exceeded by the system (i.e., the
system is not capable of generating more than this number
of simultaneous standing conditions)."
::= { condActive 1 }
condActiveTable OBJECT-TYPE
SYNTAX SEQUENCE OF CondActiveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of active conditions on the system.
The table index is virtual and does not represent a physical location.
As each new condition is generated, it is assigned a new identifier;
old identifiers are not reused.
An entry in the table is removed when the condition it represents
is cleared. Note that this means the identifiers of the standing
conditions in the table cannot be assumed to be consecutive."
::= { condActive 2 }
condActiveEntry OBJECT-TYPE
SYNTAX CondActiveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row that contains information about an active condition."
INDEX { condActiveIndex }
::= { condActiveTable 1 }
CondActiveEntry ::=
SEQUENCE {
condActiveIndex ConditionIndex,
condActiveLocation ConditionLocation,
condActiveDateAndTime DateAndTime,
condActiveCategory ConditionCategory,
condActiveSeverity ConditionSeverity,
condActiveProbableCause ConditionProbableCause,
condActiveServiceAffecting TruthValue,
condActiveText SnmpAdminString
}
condActiveIndex OBJECT-TYPE
SYNTAX ConditionIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique identifier of the condition within this table."
::= { condActiveEntry 1 }
condActiveLocation OBJECT-TYPE
SYNTAX ConditionLocation
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The device generated identifier indicating the location of the equipment
that generated the condition (e.g. node.shelf.slot.port)."
::= { condActiveEntry 2 }
condActiveDateAndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date and time when the condition was generated."
::= { condActiveEntry 3 }
condActiveCategory OBJECT-TYPE
SYNTAX ConditionCategory
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The category of the condition, as assigned by the device
that generated it."
::= { condActiveEntry 4 }
condActiveSeverity OBJECT-TYPE
SYNTAX ConditionSeverity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The perceived severity level of the condition, as assigned
by the device that generated the condition."
::= { condActiveEntry 5 }
condActiveProbableCause OBJECT-TYPE
SYNTAX ConditionProbableCause
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A high level qualification of the cause of the condition."
::= { condActiveEntry 6 }
condActiveServiceAffecting OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether or not the condition is service
affecting."
::= { condActiveEntry 7 }
condActiveText OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A text description of the condition."
::= { condActiveEntry 8 }
----------------------------
-- Retired condition objects
----------------------------
condRetiredMaxNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of retired standing conditions the system will store in
condRetiredTable. This table provides a history of conditions
that have been cleared."
::= { condRetired 1 }
condRetiredTable OBJECT-TYPE
SYNTAX SEQUENCE OF CondRetiredEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of retired standing conditions on the system.
The table index is virtual and does not represent a physical location.
As each new condition is generated, it is assigned a new identifier;
old identifiers are not reused.
Once the condRetiredTable contains the maximum number of entries,
the oldest entry would be deleted to make room for new entry."
::= { condRetired 2 }
condRetiredEntry OBJECT-TYPE
SYNTAX CondRetiredEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row that contains information about an retired condition."
INDEX { condRetiredIndex }
::= { condRetiredTable 1 }
CondRetiredEntry ::=
SEQUENCE {
condRetiredIndex ConditionIndex,
condRetiredLocation ConditionLocation,
condRetiredDateAndTimeGenerated DateAndTime,
condRetiredDateAndTime DateAndTime,
condRetiredCategory ConditionCategory,
condRetiredSeverity ConditionSeverity,
condRetiredProbableCause ConditionProbableCause,
condRetiredServiceAffecting TruthValue,
condRetiredText SnmpAdminString,
condRetiredResolution SnmpAdminString
}
condRetiredIndex OBJECT-TYPE
SYNTAX ConditionIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique identifier of the retired condition within this table."
::= { condRetiredEntry 1 }
condRetiredLocation OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The device generated identifier indicating the location of the equipment
that generated the condition. It is the same as condActiveLocation."
::= { condRetiredEntry 2 }
condRetiredDateAndTimeGenerated OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date and time when the condition was generated. It is the same as
condActiveDateAndTime."
::= { condRetiredEntry 3 }
condRetiredDateAndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date and time when the condition was retired."
::= { condRetiredEntry 4 }
condRetiredCategory OBJECT-TYPE
SYNTAX ConditionCategory
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The category of the condition, as assigned by the device
that generated it. It is the same as condActiveCategory."
::= { condRetiredEntry 5 }
condRetiredSeverity OBJECT-TYPE
SYNTAX ConditionSeverity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The perceived severity level of the condition when it was active, as
assigned by the device that generated the condition.
It is the same as condActiveSeverity."
::= { condRetiredEntry 6 }
condRetiredProbableCause OBJECT-TYPE
SYNTAX ConditionProbableCause
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A high level qualification of the cause of the condition when it
was active. It is the same as condActiveProbableCause."
::= { condRetiredEntry 7 }
condRetiredServiceAffecting OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether or not the condition was service
affecting when it was active. It is the same as
condActiveServiceAffecting."
::= { condRetiredEntry 8 }
condRetiredText OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A text description of the condition. It is the same as condActiveText."
::= { condRetiredEntry 9 }
condRetiredResolution OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Free-form text containing resolution information."
::= { condRetiredEntry 10 }
---------------------------
-- Transient condition objects
---------------------------
condtransientMaxNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of transient conditions the system will
store in condtransientTable. This value is set high
enough that it cannot be exceeded by the system (i.e., the
system is not capable of generating more than this number
of simultaneous standing conditions)."
::= { condtransient 1 }
condtransientTable OBJECT-TYPE
SYNTAX SEQUENCE OF CondtransientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of transient conditions on the system.
The table index is virtual and does not represent a physical location.
As each new condition is generated, it is assigned a new identifier;
old identifiers are not reused. Therefore, the identifiers of the transient
conditions in the table cannot be assumed to be consecutive.
When the table reaches the max number of entries, the oldest one is deleted
to make room for the new transient condition"
::= { condtransient 2 }
condTransientEntry OBJECT-TYPE
SYNTAX CondTransientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row that contains information about an transient condition."
INDEX { condTransientIndex }
::= { condTransientTable 1 }
CondTransientEntry ::=
SEQUENCE {
condTransientIndex ConditionIndex,
condTransientLocation ConditionLocation,
condTransientDateAndTime DateAndTime,
condTransientCategory ConditionCategory,
condTransientSeverity ConditionSeverity,
condTransientProbableCause ConditionProbableCause,
condTransientServiceAffecting TruthValue,
condTransientText SnmpAdminString
}
condTransientIndex OBJECT-TYPE
SYNTAX ConditionIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique identifier of the condition within this table."
::= { condTransientEntry 1 }
condTransientLocation OBJECT-TYPE
SYNTAX ConditionLocation
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The device generated identifier indicating the location of the equipment
that generated the condition (e.g. node.shelf.slot.port)."
::= { condTransientEntry 2 }
condTransientDateAndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date and time when the condition was generated."
::= { condTransientEntry 3 }
condTransientCategory OBJECT-TYPE
SYNTAX ConditionCategory
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The category of the condition, as assigned by the device
that generated it."
::= { condTransientEntry 4 }
condTransientSeverity OBJECT-TYPE
SYNTAX ConditionSeverity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The perceived severity level of the condition, as assigned
by the device that generated the condition."
::= { condTransientEntry 5 }
condTransientProbableCause OBJECT-TYPE
SYNTAX ConditionProbableCause
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A high level qualification of the cause of the condition."
::= { condTransientEntry 6 }
condTransientServiceAffecting OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether or not the condition is service
affecting."
::= { condTransientEntry 7 }
condTransientText OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A text description of the condition."
::= { condTransientEntry 8 }
-----------------
-- Notifications
-----------------
condNotificationSelection OBJECT-TYPE
SYNTAX BITS {
cleared(0),
indeterminate(1),
warning(2),
minor(3),
major(4),
critical(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the perceived condition severities for which
notifications are sent. If a bit is set, a notification is sent for each
new condition with the corresponding perceived severity.
By default, all bits are set except indeterminate(1)."
::= { condNotice 1 }
condActiveEvent NOTIFICATION-TYPE
OBJECTS {
condActiveIndex,
condActiveLocation,
condActiveDateAndTime,
condActiveCategory,
condActiveSeverity,
condActiveProbableCause,
condActiveServiceAffecting,
condActiveText
}
STATUS current
DESCRIPTION
" To notify an active condition, this notification is sent for every condition
severity level that is enabled in condNotificationSelection.
The objects are the same as in the associated entry in the
condActiveTable."
::= { condEventsV2 1 }
condRetiredEvent NOTIFICATION-TYPE
OBJECTS {
condRetiredIndex,
condRetiredLocation,
condRetiredDateAndTimeGenerated,
condRetiredDateAndTime,
condRetiredCategory,
condRetiredSeverity,
condRetiredProbableCause,
condRetiredServiceAffecting,
condRetiredText,
condRetiredResolution
}
STATUS current
DESCRIPTION
" To notify that a condition is cleared, this notification is sent
for every condition severity level that is enabled in condNotificationSelection.
The objects are the same as in the associated entry in the
condRetiredTable."
::= { condEventsV2 2 }
-- conformance information
-- To be Added
END
6. Security Considerations
There are a number of management objects defined in this MIB that
have a MAX-ACCESS clause of read-write and/or read-create. Such
objects may be considered sensitive or vulnerable in some network
environments. The support for SET operations in a non-secure
environment without proper protection can have a negative effect on
network operations.
So, it is important to control the GET access to these objects and possibly
even encrypt the object values when sending them over the network via SNMP.
Not all versions of SNMP provide features for such a secure environment.
SNMPv1 by itself is not a secure environment. Even if the network
itself is secure (for example by using IPSec), there is no
control as to who on the secure network is allowed to access and
GET/SET (read/change/create/delete) the objects in this MIB.
It is recommended that the implementers consider the security
features as provided by the SNMPv3 framework. Specifically, the use
of the User-based Security Model RFC 2574 [RFC2574] and the View-based
Access Control Model RFC 2575 [RFC2575] is recommended.
It is then a customer/user responsibility to ensure that the SNMP
entity giving access to an instance of this MIB, is properly
configured to give access to the objects only to those principals
(users) that have legitimate rights to indeed GET or SET
(change/create/delete) them.
7. Acknowledgements
The authors wish to thank Brian Teer for reviewing and commenting
on this draft.
8. References
[RFC2571] Harrington, D., Presuhn, R., and B. Wijnen, "An Architecture
for Describing SNMP Management Frameworks", RFC 2571, April
1999.
[RFC1155] Rose, M., and K. McCloghrie, "Structure and Identification
of Management Information for TCP/IP-based Internets", STD
16, RFC 1155, May 1990.
[RFC1212] Rose, M. and K. McCloghrie, "Concise MIB Definitions", STD 16,
RFC 1212, March 1991.
[RFC1215] M. Rose, "A Convention for Defining Traps for use with the
SNMP", RFC 1215, March 1991.
[RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M., and S. Waldbusser, "Structure of Management
Information Version 2 (SMIv2)", STD 58, RFC 2578, April
1999.
[RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M., and S. Waldbusser, "Textual Conventions for
SMIv2", STD 58, RFC 2579, April 1999.
[RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M., and S. Waldbusser, "Conformance Statements for
SMIv2", STD 58, RFC 2580, April 1999.
[RFC1157] Case, J., Fedor, M., Schoffstall, M., and J. Davin, "Simple
Network Management Protocol", STD 15, RFC 1157, May 1990.
[RFC1901] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser,
"Introduction to Community-based SNMPv2", RFC 1901, January
1996.
[RFC1906] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser,
"Transport Mappings for Version 2 of the Simple Network
Management Protocol (SNMPv2)", RFC 1906, January 1996.
[RFC2572] Case, J., Harrington D., Presuhn R., and B. Wijnen, "Message
Processing and Dispatching for the Simple Network Management
Protocol (SNMP)", RFC 2572, April 1999.
[RFC2574] Blumenthal, U., and B. Wijnen, "User-based Security Model
(USM) for version 3 of the Simple Network Management
Protocol (SNMPv3)", RFC 2574, April 1999.
[RFC1905] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser,
"Protocol Operations for Version 2 of the Simple Network
Management Protocol (SNMPv2)", RFC 1905, January 1996.
[RFC2573] Levi, D., Meyer, P., and B. Stewart, "SNMPv3 Applications",
RFC 2573, April 1999.
[RFC2575] Wijnen, B., Presuhn, R., and K. McCloghrie, "View-based
Access Control Model (VACM) for the Simple Network
Management Protocol (SNMP)", RFC 2575, April 1999.
[RFC2570] Case, J., Mundy, R., Partain, D., and B. Stewart,
"Introduction to Version 3 of the Internet-standard Network
Management Framework", RFC 2570, April 1999.
[RFC1213] McCloghrie, K. and M. Rose, "Management Information Base for
Network Management of TCP/IP-based internets - MIB-II", STD 17,
RFC 1213, March 1991.
[RFC2863] McCloghrie, K. and F. Kastenholz, "The Interfaces Group MIB",
RFC 2863, June 2000.
[ITU G.709] ITU Recommendation G.709, "Network Node Interface for the
Optical Transport Network (OTN)", Draft Issue 0.8.3 (10/00).
[X.733] ITU Recommendation X.733, "Information Technology - Open Systems
Interconnection - System Management: Alarm Reporting Function", 1992.
[X.736] ITU Recommendation
9. Author's Address
Name(s): An-ni Huynh
Company: Lucent Technologies
Address: 480 Red Hill Road, Room 1B-223
Middletown, NJ 07748-3098
Phone: 732-615-5402
EMail: ahuynh@lucent.com
Name(s): Mark Stewart
Company: Lucent Technologies
Address: 1801 Varsity Drive
Raleigh, NC 27606
Phone:
EMail: markStewart@lucent.com
10. Intellectual Property
The IETF takes no position regarding the validity or scope of any
intellectual property or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; neither does it represent that it
has made any effort to identify any such rights. Information on the
IETF's procedures with respect to rights in standards-track and
standards-related documentation can be found in BCP-11. Copies of
claims of rights made available for publication and any assurances of
licenses to be made available, or the result of an attempt made to
obtain a general license or permission for the use of such
proprietary rights by implementers or users of this specification can
be obtained from the IETF Secretariat.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights which may cover technology that may be required to practice
this standard. Please address the information to the IETF Executive
Director.
Expires May 15 2001 [Page xx]
