Internet DRAFT - draft-iab-itu-enum-notes

draft-iab-itu-enum-notes



INTERNET-DRAFT                                John C. Klensin
16 January 2002                           Editor, for the IAB
Expires June 2002


		The History and Context of ENUM Operational Decisions:
		   Informational Documents Contributed to ITU-T SG2
				   draft-iab-itu-enum-notes-00.txt

Status of this Memo

This document is an Internet-Draft and is in full conformance
with all provisions of Section 10 of RFC2026 except that the
right to produce derivative works is not granted.

Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups.  Note that
other groups may also distribute working documents as Internet-Drafts.

Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time.  It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."

The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt

The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.

Copyright Notice

Copyright (C) The Internet Society (2000).  All Rights Reserved.



0. Abstract

RFC 2916 assigned responsibility for a number of administrative and
operational details of ENUM to the IAB.  It also anticipated that ITU
would take responsibility for determining the legitimacy and
appropriateness of applicants for delegation of "country code"-level
subdomains of the top-level ENUM domain.  Recently, three memos have
been prepared for the ITU-T Study Group 2 to explain the background
of, and reasoning for, the relevant decisions.  The IAB has also
supplied a set of procedural instructions to The RIPE NCC for
implementation of their part of the model. The content of the three
memos is provided in this document for the information of the IETF
community.


Table of Contents

1. Introduction: ENUM Background Information
2. Why one and only one domain is used in ENUM
3. Why .ARPA was selected as the top level domain for ENUM
4. The selection of an operator for E164.ARPA
5. Procedures to be followed by RIPE NCC
6. References
6.1. Normative references
6.2. Informative and explanatory references
7. Security Considerations
8. IANA Considerations
9. Authors' Addresses


1. Introduction: ENUM Background Information

In January 2002, in response to questions from ITU-T Study Group 2
(referred to just as "SG2", below), specifically its group working on
"Questions 1 and 2", and members of the IETF and telecommunications
communities, Scott Bradner, as Area Director responsible for the ENUM
work and ISOC Vice President for Standards, initiated an effort to
produce explanations of the decisions made by the IETF about ENUM
administration.  The effort to produce and refine those documents
eventually involved him, Patrik Faltstrom (author of RFC 2916), and
several members of the IAB.

The documents have now been contributed to ITU-T, and are being
published as internal SG2 documents.  This document provides the IETF
community a copy of the information provided to SG2.  Section 2 below
contains the same content as COM 2-11-E, section 3 contains the same
content as COM 2-12-E, and section 4 contains the same content as SG2
document COM 2-10-E.  The documents being published within SG2 show
their source as "THE INTERNET SOCIETY ON BEHALF OF THE IETF", which
is a formality deriving from the fact that ISOC holds an ITU sector
membership on behalf of the IETF.


2. 	Why one and only one domain is used in ENUM
 
2.1.	Introduction

This contribution is one of a series provided by the IETF to ITU-T
SG2 to provide background information about the IETF's ENUM Working
Group deliberations and decisions.  This particular contribution
addresses the IETF's decision that only a single domain could be
supported in ENUM.

2.2.	The need for a single root in the DNS

In the Domain Name System (DNS), each domain name is globally unique.
This is a fundamental fact in the DNS system and follows
mathematically from the structure of that system as well as the
resource identification requirements of the Internet. Which DNS
server is authoritative for a specific domain is defined by
delegations from the parent domain, and this is repeated recursively
until the so-called root zone, which is handled by a well-known set
of DNS servers.  Note that words like "authoritative" and
"delegation" and their variations are used here in their specific,
technical, DNS sense and may not have the same meanings they normally
would in an ITU context.

Given that one starts with the well-known root zone, every party
querying the DNS system will end up at the same set of servers for
the same domain, regardless of who is sending the query, when the
query is sent and where in the network the query is initiated.  In
May 2000 the IAB published a document on the need for a single root
in the DNS.  This document explores the issues in greater detail.
See RFC 2826 (http://www.ietf.org/rfc/rfc2826.txt?number=2826 ).


2.3.	Storing E.164 numbers in the DNS

An E.164 number is also globally unique, and because of that it has
the most of the same properties as a domain name. This was the reason
why storing E.164 numbers in the DNS system is technically a simple
mapping.  ENUM is just that, a way to store E.164 numbers in the DNS.
Multiple ENUM trees in the DNS hierarchy would have the telephony
equivalent of permitting every carrier to assign a different meaning
to an E.164 country code, with each one potentially mapping a given
number to a different circuit or rejecting it entirely.  For the
Internet, if there were multiple trees, there would be no way to
determine which domains might contain ENUM records.  Thus, each
application that uses ENUM facilities would have to be manually
configured with a list of domains to be searched.  This would incur
the same problems of scaling and updates that led to the development
of the DNS.

The goal with ENUM is that one party should be able to look up
information in DNS, which another party has stored in DNS. This must
be possible with only the E.164 number as input to the algorithm.

If the party storing information in DNS has two (or more) places to
choose from, and chooses one of them, how is a second party looking
up things to know what place was selected?  An analogy would be if
one knew only www.whitehouse, and not the TLD, and ask people to go
to that website. Is the correct domain name www.whitehouse.gov,
www.whitehouse.com or www.whitehouse.se?  It should be noted that
www.whitehouse.com exists and is a pornography site.

Thus, the only way of knowing where to look up E.164/ENUM numbers in
DNS is to use one and only one domain, and have everyone agree on
what that domain is.  Note that ENUM is a system for use with E.164
numbers in their general, global, context. Nothing technical can, or
should, try to prevent parties that wish to use ENUM-like mechanisms,
or other systems that have the same general structure as telephone
numbers, from working out private, out of band, agreements to support
those applications.  However, such applications are neither E.164 nor
ENUM, any more than internal extension numbers in a PBX are normally
considered to be part of either.


3. Why .ARPA was selected as the top level domain for ENUM

3.1.	Introduction

This memo is one of a series provided by the IETF to SG2 to provide
background information about the IETF's ENUM Working Group
deliberations and decisions.  This particular memo addresses the
IETF's decision that the ENUM DNS tree would use the .ARPA top level
domain. 

3.2.	IAB Statement on Infrastructure Domain and Subdomains 

(Taken from http://www.iab.org/iab/DOCUMENTS/iab-arpa-stmt.txt , May
2000) 

Over the last several months, the IAB has been reviewing, and
discussing with ICANN and other parties, the handling of various
Internet Protocol-related infrastructure components that the
community has concluded should be placed into the DNS.  

Historically, the most visible infrastructure domain has been the
IPv4 address reverse-mapping domain.  This domain was placed in
"in-addr.arpa" as part of the initial ARPANET transition strategy
from host table naming (see RFC 881-
http://www.ietf.org/rfc/rfc0881.txt?number=881 ).  Other than the
IPv4 reverse-mapping subdomain, it became the only active subdomain
of that domain as the <host-table-name>.ARPA names that were also
part of the transition were gradually removed.  Other infrastructure
domains were in the past placed under the "INT" TLD and various
organizational names.

It is in the interest of general Internet stability, adequate
attention to the placement of secondary DNS servers, and
administrative cleanliness, to start rationalizing this situation by
locating new infrastructure subdomains in a single domain and
migrating existing ones to it as appropriate.  It appears that our
original infrastructure domain "ARPA", redesignated from an
abbreviation for "ARPANET" to an acronym for "Address and Routing
Parameters Area" is best suited for this purpose.

3.3.	Infrastructure subdomains

Operationally, it is easier to ensure good stability for DNS in
general if we have as few DNS zones as possible that are used for
parameters for infrastructure purposes. Today new infrastructure
domains are put in ARPA and old assignments which were made in other
domains are being migrated to ARPA.  Currently ARPA is used for
in-addr.arpa (for reverse mapping of IPv4 addresses), ip6.arpa, (for
reverse mapping of IPv6 addresses), and e164.arpa, (the subject of
this memo).  In the future, URI schemes, URN namespaces and other new
address families will be stored in ARPA.

Theoretically, each set of infrastructure parameters could be stored
in a separate domain as a TLD.  (For example, .URI, .UNI, .IPV6,
.ENUM) But in that case every infrastructure parameter would need a
new TLD, which only can be created via the ICANN process (which might
take a year or more) and would unnecessarily and undesirably flatten
the DNS tree.  It is much easier to have one TLD with easily created
new subdomains (2nd level domains), one for each parameter. Thus it
was logical to store E.164 numbers in ARPA.

3.4.	The ARPA domain (derived from RFC 3172, September 2001)

The "arpa" domain was originally established as part of the initial
deployment of the DNS, to provide a transition mechanism from the
Host Tables that were previously standard in the ARPANET.  It was
also used to provide a permanent home for IPv4 address to name
mappings ("reverse mappings") which were previously also handled
using the Host Table mechanism.  The Internet Architecture Board
(IAB), in cooperation with the Internet Corporation for Assigned
Names and Numbers (ICANN), is currently responsible for managing the
Top Level Domain (TLD) name "arpa".  This arrangement is documented
in Appendix A. [of RFC 3172] This domain name provides the root of
the name hierarchy of the reverse mapping of IP addresses to domain
names.  More generally, this domain name undertakes a role as a
limited use domain for Internet infrastructure applications, by
providing a name root for the mapping of particular protocol values
to names of service entities.  This domain name provides a name root
for the mapping of protocol values into lookup keys to retrieve
operationally critical protocol infrastructure data records or
objects for the Internet.

The IAB may add other infrastructure uses to the "arpa" domain in the
future.  Any such additions or changes will be in accordance with the
procedures documented in Section 2.1 and Section 3 of this document.
[referring to RFC 3172] This domain is termed an "infrastructure
domain", as its role is to support the operating infrastructure of
the Internet.  In particular, the "arpa" domain is not to be used in
the same manner (e.g., for naming hosts) as other generic Top Level
Domains are commonly used.

The operational administration of this domain, in accordance with the
provisions described in this document, shall be performed by the IANA
under the terms of the MoU between the IAB and ICANN concerning the
IANA [RFC 2860].

3.5.	Assignment of the .ARPA top level domain

As documented in appendix A of RFC 3172, on April 28, 2000 the US
Department of Commerce, acting under the authority of its purchase
order with ICANN, directed ICANN to operate the .ARPA TLD under the
guidance of the IAB, as a limited use domain for internet
infrastructure applications.

3.6.	Name Server Requirements for .ARPA (from RFC 3172)

As this domain is part of the operationally critical infrastructure
of the Internet, the stability, integrity and efficiency of the
operation of this domain is a matter of importance for all Internet
users.

The "arpa" domain is positioned as a top level domain in order to
avoid potential operational instabilities caused by multiple DNS
lookups spanning several operational domains that would be required
to locate the servers of each of the parent names of a more deeply
nested infrastructure name.  The maximal lookup set for ARPA is a
lookup of the name servers for the "arpa" domain from a root server,
and the query agent is then provided with a list of authoritative
"arpa" name servers.

The efficient and correct operation of the "arpa" domain is
considered to be sufficiently critical that the operational
requirements for the root servers apply to the operational
requirements of the "arpa" servers.  All operational requirements
noted in RFC 2870 as they apply to the operational requirements of
the root servers shall apply to the operation of the "arpa" servers.
Any revision to RFC 2870 in relation to the operation of the root
servers shall also apply to the operation of the "arpa" servers.

Many of the servers that are authoritative for the root zone (or the
"." zone) also currently serve as authoritative for the "arpa" zone.
As noted in RFC 2870, this arrangement is likely to change in the
future.

3.7.	Summary: ENUM use of .ARPA

The ARPA domain is the preferred TLD for infrastructure and parameter
use.  The ENUM structure should be placed in a single domain subtree
(see separate contribution, COM 2-11), and is expected to evolve into
important Internet infrastructure, and hence should be placed there.
This decision is facilitated by the MOU between ICANN and IETF and
the instructions from the US Government to ICANN, which provide for
IAB supervision of that domain. Despite some confusion with the name
of a US Department of Defence agency, DARPA, these uses are
consistent with all of the historical uses of the ARPA domain, which
have been for infrastructure purposes (initially when the
hierarchical DNS was created to replace the old flat namespace of
ARPANET): the domain was never used for any internal or specific
DARPA purpose.  Recognizing the potential difficulties with multiple
infrastructure domains, the Internet Architecture Board concluded in
May 2000 that all new infrastructure information was to be stored in
the ARPA domain and existing infrastructure subtrees migrated there
as feasible. http://www.iab.org/iab/DOCUMENTS/iab-arpa-stmt.txt
provides additional context for these decisions.

The ENUM Working Group decided to follow that recommendation.


4. The selection of an operator for E164.ARPA

4.1.	Introduction

This contribution is one of a series provided by the IETF to SG2 to
provide background information about the IETF's ENUM Working Group
deliberations and decisions.  This particular contribution addresses
the IETF's selection of an operator for the E164.ARPA domain.

4.2.	Name server operator requirements

RFC 2870 (http://www.ietf.org/rfc/rfc2780.txt?number=2780 ) describes
the requirements for operating DNS root servers.  Important DNS-based
infrastructure services require that their servers be operated with
the same level of attention to reliability and security that the root
servers require.  In addition, for an infrastructure service such as
E164.ARPA some additional requirements were felt by the IAB to be
important.  Organizations that operate core services such as
IN-ADDR.ARPA and E164.ARPA must have a history of reliable operation
of DNS servers and be highly respected and known for both their
relevant technical skills and their fairness and impartiality.  In
addition, the IAB felt that the organization that operates such
infrastructure domains must be a non-profit and public-service
-oriented one to remove any incentive for exploitative behavior based
on profit motives that depend on, e.g., the number of records in the
database even if some reasonable registration fee is charged to
recover costs.  The IAB also felt that they wanted an organization
with good (and extensive) experience working with governments when
necessary and one with experience working with the IAB and the IETF
more generally.

4.3.	Evaluating possible operators

The IAB researched various options for operators and came to the
conclusion that the regional IP address registries (RIRs) met all of
the criteria.  They all had extensive experience providing and
supporting infrastructure services reliably and securely and all
three of them had a long history of working with the IETF.  

4.4.	Selecting a particular operator

Given that all of the RIRs would have met the criteria, the selection
of a particular RIR required looking at other factors. The IAB
concluded that RIPE NCC would be the best operator for E164.ARPA,
based largely on their somewhat greater experience in running DNS
servers and on their location in a neutral legal jurisdiction.

4.5.	Country administration of cc subdomains

Of course, once a subdomain associated with a country code is
assigned for registration and operations to an
appropriately-designated entity for the associated country or
numbering plan, administration of that subdomain is entirely a
National Matter, with no involvement anticipated from the IAB/IETF,
the E164.ARPA registry, or from the ITU.


5. Procedures to be followed by RIPE NCC

The IAB and the RIPE NCC have agreed on procedures for the latter to
follow in making ENUM registrations at the country code level.  Those
instructions are expected to evolve as experience is accumulated.
Current versions will be posted on the IAB and/or RIPE NCC web sites.


6. References

6.1. Normative references

None.  This document is intended to be self-contained and purely
informational.

6.2.  Informative and explanatory references.

RFC 2860.  Carpenter, B., F. Baker, M.  Roberts. "Memorandum of
Understanding Concerning the Technical Work of the Internet Assigned
Numbers Authority". June 2000.

RFC 2870. Bush, R., D.  Karrenberg, M. Kosters, R. Plzak. "Root Name
Server Operational Requirements".  June 2000.
 
RFC 2916. Faltstrom, P. "E.164 number and DNS", September 2000.

RFC 3172. IAB, G. Huston, editor, "Management Guidelines &
Operational Requirements for the Address and Routing Parameter Area
Domain ('arpa')". September 2001.


7. Security Considerations

This document provides information only and raises no new security
issues.  The security issues associated with the underlying protocols
are described in RFC 2916.

8.  IANA Considerations

There are no IANA considerations regarding this document.  Sections 3
and 4 contain a record of actions already performed by IANA and
partial explanations for them.


9.   Authors' Addresses

Internet Architecture Board
EMail:  iab@iab.org

      Membership at time this document was completed:

      Harald Alvestrand
      Ran Atkinson
      Rob Austein
      Fred Baker
      Steve Bellovin
      Brian Carpenter
      Jon Crowcroft
      Leslie Daigle
      Steve Deering
      Sally Floyd
      Geoff Huston
      John Klensin
      Henning Schulzrinne

Scott Bradner
sob@harvard.edu

Patrik Faltstrom
paf@cisco.com

This draft was created in January 2002
It expires in June 2002.